AJAX VHF MultiTransmitter Wireless Integration

Order Code: 22805
Stock Level: Good
Price: €208.00
  • VHFBridge is a transponder that provides a hub with an additional channel to communicate with a monitoring station. With vhfBridge you can use Ajax systems in cities where Internet connection is unstable, in nature reserves, mountain and desert areas
  • Alarms and events of the system are transmitted via VHF radio waves over tens of kilometres1. vhfBridge can be used as a primary or a backup communication channel
  • You can build in a 7 Ah backup battery inside a vhfBridge casing. It will feed a VHF transmitter with up to 2A current consumption. Therefore, the transmitter doesn't need to have a separate battery, which makes maintenance less frequent
  • In case of a power outage at a facility, the transponder and the transmitter operate on a backup battery for up to 75 hours4 while still transmitting events to a central monitoring station
  • Similar to other Ajax devices, vhfBridge connects to a hub in the app by scanning a QR-code. The transponder casing has perforated areas for more organized wiring. Outputs are configurable with Ajax apps for smartphones and computers

Compatible with Ajax central units : Hub 2, Hub Plus, Hub 2 Plus

Tech specs

  • Classification : Transponder for communication with the monitoring station via a VHF transmitter
  • Installation : Indoors
  • Number of potential outputs : 8
  • Output types : Positive trip and negative trip (depends on the settings)
  • Transmission types : Pulse and bistable (depends on the settings)
  • Recommended VHF transmitters : Hawk VHF Alarm Transmitter from FSK Electronics / TX750C from RDC / TR-41 from Puper
  • Compatible with Ajax range extenders : +
  • Compatibility with third-party VHF radio transmitters : vhfBridge connects to any VHF transmitter with relay inputs
  • Support for photo verification of alarms : No
  • Primary power supply : 100–240 V, 50/60 Hz
  • Backup power supply : 12 V DC, up to 75 hours of power for a transponder and a transmitter
  • Supported battery type : 12 V battery with a full charge cycle of up to 30 hours. / The maximum battery size installed in the casing should be 150 × 64 × 94 mm
  • Recommended battery type : 12 V battery with a capacity of 4 Ah or 7 Ah / Backup battery is not included in the set
  • VHF transmitter power : 12 V DC, 2 A
  • Anti-sabotage : Protecting against forgery / Jamming notifications / Tampers against opening and removal / Backup battery
  • Jeweller radio protocol : Communication range — up to 1,800 meters in a line of sight / Two-sided communication between devices / Operating frequencies: 868.0–868.6 MHz / Auto-regulated radio signal power: ≤ 25 mW / Blocking encryption based on the AES algorithm / Detector ping interval: 12–300 seconds / Frequency hopping
  • Maximum radio signal power : ≤ 25 mW
  • Protection class : IP50
  • Operating temperature range : From –10°C to +40°C
  • Operating humidity : Up to 75%
  • Overall dimensions : 196 × 238 × 100 mm (with casing) / 145 × 89 × 51 mm (without casing)
  • Weight : 840 g (with casing) / 165 g (without casing)
Send us your questions about the product.