2 stereo preamplifier coax outputs for powered subwoofer, AV Receiver, and secondary power amplifiers
Expandable to 96 rooms
Configure room for stereo or mono
18dB input gain adjustment
EQ settings per room, include: Loudness, Balance, Bass and Treble
Each room supports a 4-band parametric equalizer
Configurable maximum volume per room
Configurable power on volume per room
Configurable audio delay per room
Input Sources
Source 1: Analog Stereo input
Source 2: Balanced analog stereo input (requires included BALTX2 accessory)
Source 3: Balanced optical input (requires included BALTX2 accessory)
Sources 5/6: 2 x configurable coax digital connections, configured either as inputs or /outputs. Outputs can either be configured as source 1 or 2, or a zone 1-4.
2 buffered coax digital outputs used to link sources with an additional expansion unit
Programmable delay up to 600 ms
1 x IR emitter ports designed to relay all IR signals from one or both keypads
Keypads
2 Keypad ports are available for use with optional keypads
IR receiver integrated with keypads
Configurable source specific IR routing available
Network
Control the matrix amplifier using standard IP network connection
Select Static or Dynamic IP Address
Other
Temperature monitoring and thermal control protection
Low standby power
Wall mountable
Firmware upgradable for maintenance and future functionality
Amplifier Section
RMS Power @ 8 ohms: 30W x 4 (8 Ohms, all channels driven, 1% THD)
Speaker Impedance: 8 Ohms (4 capable for 1 zone only)
Output short circuit, thermal and hard clipping protection
18dB input gain adjustment
Speaker Impedance: 4-8 Ohms
Interface
IR Output: 1 x 3.5mm Jack
Ethernet: 100Base T
General
Power Supply: 110 / 240VAC 50/60 HZ
Dimensions: 6.5” x 5.8” x 1.4” (435 x 90 x 390 mm)