AJAX PIR MotionCam PhOD

MotionCam (PhOD) Jeweller is a wireless motion detector supporting photo verification of alarms, Photo on Demand, and Photo by Scenario features. Intended for indoor installation. It can recognise movement at a distance of up to 12 meters. Ignores pets when installed and set up correctly
MotionCam (PhOD) Jeweller works as part of the Ajax security system, communicating with the hub over two secure radio protocols: the detector uses Jeweller to transmit alarms and events and Wings to transmit photos. The hub communication range is up to 1,700 meters in an open space
A hub is required for the detector to operate

Compatibility

Compatible hub models : Hub 2 (2G) / Hub 2 (4G) / Hub 2 Plus / Hub Hybrid (2G) / Hub Hybrid (4G) / ReX 2

Communication

Jeweller

Proprietary wireless communication technology to transmit photo verifications :Two-way communication / Advanced anti-sabotage. / Block encryption featuring a dynamic key / Instant notifications / Remote configuration via the Ajax apps
Frequency bands : 866.0 – 866.5 MHz / 868.0 – 868.6 MHz / 868.7 – 869.2 MHz / 905.0 – 926.5 MHz / 915.85 – 926.5 MHz / 921.0 – 922.0 MHz
Maximum effective radiated power (ERP) : Up to 20 mW
Radio signal modulation : GFSK
Radio signal range : up to 1,700 m Between detector and hub or range extender in an open space
Encrypted communication : All the data stored and transmitted are protected by block encryption with a dynamic key
Radio frequency hopping : Radio communication uses frequency hopping to prevent interception and jamming

Wings

Proprietary wireless communication technology to transmit photo verifications : Two-way communication / Block encryption featuring a dynamic key / Advanced anti-sabotage / Data package reloading in case of transmission errors / Photo delivery check.
Frequency bands : 866.0 – 866.5 MHz / 868.0 – 868.6 MHz / 868.7 – 869.2 MHz / 905.0 – 926.5 MHz / 915.85 – 926.5 MHz / 921.0 –922.0 MHz
Radio signal range : up to 1,700 m
Encrypted communication : All the data stored and transmitted are protected by block encryption with a dynamic key
Radio frequency hopping : Radio communication uses frequency hopping to prevent interception and jamming

Detection

Sensitive element : 1 × PIR sensor
Motion detection distance : up to 12 m When installed at a height of 2.4 m
Motion detection angles : horizontal — 88.5° / vertical — 80°
Motion detection speed : from 0.3 to 2.0 m/s
Sensitivity : 3 levels
Pet immunity : weight: up to 20 kg / height: up to 50 cm
False alarm prevention : SmartDetect / Software algorithm.
Temperature compensation : Effective motion detection in temperatures from −10°C to +40°C

Photo verification

Photo by alarm : A built-in camera is activated if the detector is armed and motion is detected
Photo on demand : User takes pictures at any time or when the detector is armed (depends on settings). The feature is disabled by default
Photo by scenario : A detector camera takes pictures automatically when Ajax fire detectors are triggered. The feature is disabled by default
Photo resolution : 640 × 480 px / 320 × 240 px (by default) 160 × 120 px /Adjusted by PRO or user with admin rights in the Ajax app
IR backlight : For night photography and low light conditions
Pictures in a series : from 1 to 5 images with resolution of 320 × 240 px or 160 × 120 px / from 1 to 3 images with resolution of 640 × 480 px / Adjusted by PRO or user with admin rights in the Ajax app.
Photo delivery time : up to 7 s — 160 × 120 px resolution / up to 9 s — 320 × 240 px resolution / up to 20 s — 640 × 480 px resolution
When the hub is connected via Ethernet or 4G and the Wings signal strength between hub and device is 2–3 bars. Photo delivery time when the detector is connected via range extender is available here

Anti-sabotage protection

Tampering alarm : Alerts of attempts to detach the detector from the surface or remove it from the mounting panel
Protection against forgery : device authentication
Communication loss detection : within 36 s
Detection time depends on the Jeweller settings

Power supply