Wireless PIR motion detector with extended photo verification possibilities. For outdoor installation at a height of 2–4 m.
Proprietary wireless communication technology to transmit commands, alarms, and events.
Key features:
- Two-way communication.
- Advanced sabotage protection.
- Block encryption featuring a dynamic key.
- Instant notifications.
- Remote control and configuration in Ajax apps.
It is recommended to install the detector at a height of 2–4 m.
The pet immunity feature is not available for this device.
The device is designed for outdoor and indoor use.
Wireless Communication
- Frequency Bands : 866.0–866.5 MHz / 868.0–868.6 MHz / 868.7–869.2 MHz / 905.0–926.5 MHz / 915.85–926.5 MHz / 921.0–922.0 MHz
Depends on the sales region.
- Maximum Effective Radiated Power : Up to 25 mW
Automatic power control to reduce power consumption and radio interference.
- Radio Signal Modulation : GFSK
- Radio Communication Range : Up to 1,700 m
- Between the device and a hub (or a range extender) in an open space.
Encrypted Communication
- All stored and transmitted data are protected by block encryption featuring a dynamic key.
Frequency Hopping
- Prevents radio interference and jamming.
Wings Communication Technology
- Proprietary wireless communication technology to transmit photo verifications.
Detection
- Sensitive Elements : 2 × PIR sensor / 1 × K-band microwave sensor
- Operating frequency: 24 GHz
- Motion Detection Distance : Up to 15 m
When installed at a height of 2–4 m. Depends on the sensitivity level adjusted in the device settings.
- Motion Detection Angle : Horizontal: 90°
- Motion Detection Speed : From 0.3 to 2.0 m/s
Sensor direction should be perpendicular to the likely intrusion path.
Adjusted by a PRO or user with admin rights in Ajax apps.
- False Alarm Prevention : SmartDetect (software algorithm)
- Temperature Compensation : Effective movement detection in temperatures from −25 °C to +60 °C
- Photo Verification
- Photo by Alarm
- The built-in camera is activated if the detector is armed and movement is detected.
- Photo on Demand
- A user can take pictures at any time or when the detector is armed (depending on settings).
- Disabled by default.
Photo by Scenario
- Automatically takes pictures when other Ajax detectors are triggered.
Not configured by default.
Photo by Schedule
- Automatically takes pictures at a specified time.
Not configured by default.
Photo by Arming/Disarming
- Automatically takes pictures when the security state changes.
- Adjustable Photo Resolution : 640 × 480 px / 320 × 240 px (default)
Adjusted by a PRO or user with admin rights in Ajax apps.
- Camera Viewing Angles : Horizontal: 115° / Vertical: 84°
- HDR Image : Improves accuracy of details in bright and dark scenes.
- IR Backlight : Supports night photography and low light conditions.
Series of Pictures
- 1 to 5 images (320 × 240 px resolution)
- 1 to 3 images (640 × 480 px resolution)
Configured in Ajax apps.
Photo Delivery Time
- Up to 9 s (320 × 240 px)
- Up to 20 s (640 × 480 px)
Depends on selected resolution in device settings.
Sabotage protection
- Tamper alarm
- Notifications of attempts to remove the detector from the mounting panel.
- Magnetometer : detects attempts to tilt or shift the detector or detach it from the surface
- Anti-masking system : detects attempts to block the detector view
Main power supply
- Battery : 6 × CR123A(Pre-installed.)
- Type : type C
- Calculated battery life : up to 3 years
- Detector operating voltage range : 3.8−6.5 V⎓
- Detector nominal operating voltage : 6 V⎓
- Quiescent detector current consumption at nominal voltage : 45 A
- Maximum detector current consumption at nominal voltage : 1,200 mA
- Full battery capacity : 4,800 mAh
- Low battery voltage : 4.2 V⎓
- Low battery recovery voltage : 5.0 V⎓
- End-of-life battery voltage : 3.8 V⎓
- The device is switched off.
- End-of-life battery capacity : 300 mAh
Optional power supply
- External supply operating voltage : 12−24 V⎓
The batteries serve as a backup when an external power supply is connected.
Enclosure
- Dimensions with the swivel mount : 234 × 98 × 230 mm
- Dimensions without the swivel mount : 234 × 98 × 137 mm
- Weight with the swivel mount : 1,010 g
- Weight without the swivel mount : 620 g
- Operating temperature range : from −25 °C to +60 °C
- Operating humidity : up to 95%
- Protection class : IP55
Send us your questions about the product.