Lenkeng HDMI Matrix over IP 1080p Transmitter LKV383Matrix-TX

Order Code: 28588

Stock Level: Good

–

Price: €119.₀₀

The Lenkeng LKV383Matrix-TX is a 1080p HDMI over IP transmitter designed to work as part of Lenkeng's HDMI Matrix over IP system. This device allows you to distribute HDMI signals over a local network (LAN), enabling flexible multi-room setups where sources can be switched and viewed on different displays.

HDMI over IP Transmission
- Transmits 1080p Full HD video and audio over a standard Ethernet network (LAN).
- Supports real-time, low-latency streaming.
HDMI Matrix Functionality
- Works with the corresponding LKV383Matrix-RX receiver(s) to create a flexible HDMI matrix system.
- Multiple transmitters and receivers can be connected, allowing any source to be viewed on any display (depending on the system’s capacity).
Network-Based Distribution
- Uses standard CAT5e/6/7 cables for transmission (up to 100m per hop).
- Can be extended using network switches for larger setups.
HDMI Compatibility
- Supports HDCP 1.4 (may not work with HDCP 2.2-protected content like some 4K Blu-rays).
- Video resolutions up to 1920×1080@60Hz.
- Supports LPCM 2.0 audio (may not support advanced formats like Dolby Atmos).
IR Remote Control Pass-Through
- Some models support IR extension, allowing remote control of source devices from the display location.
Plug-and-Play Setup
- Typically requires minimal configuration—just connect to the network and pair with receivers.

Video

Max Resolution: 1080p (1920×1080 @ 60Hz)
Supported Resolutions: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p
Color Depth: 8-bit
HDCP Support: HDCP 1.4 (may not work with HDCP 2.2 content)
Compression: Possible light compression (not lossless)

Audio

Supported Formats:
- LPCM 2.0 (Stereo)
- Dolby Digital (AC3, 5.1 passthrough, if supported by source)
- DTS (passthrough, if supported)
No Support for: Dolby TrueHD, DTS-HD, or Atmos (due to bandwidth limitations)

Network & Transmission

Transmission Method: HDMI over IP (H.264 encoding likely)
Connection: Ethernet (RJ45, 10/100Mbps)
Max Distance: Up to 100m per hop (via Cat5e/6/7)
Network Requirements: Works on a local LAN (Gigabit switch recommended for multiple streams)
Latency: Typically <150ms (not ideal for competitive gaming)

Input & Output