Superior MotionProtect Plus G3 Fibra is an indoor motion detector designed primarily for high-risk facilities. It offers precise movement detection at a distance of up to 15 meters. The device is equipped with a PIR sensor and uses radio frequency scanning with a K-band microwave sensor to filter out infrared interference. The detector accurately responds to both slow and fast movements and has a reduced blind zone. Superior MotionProtect Plus G3 uses Fibra technology and the bus connection method for instant transmission of alarms and events. All in line with the Ajax user experience.
Superior MotionProtect Plus G3 Fibra — Technical Specifications
Communication (Fibra)
-
Technology: Proprietary wired communication to transmit commands, alarms, and events
-
Key features: Two‑way communication; advanced anti‑sabotage; instant notifications; remote control and configuration in Ajax apps
-
Line connection: 4‑core cable
-
Connection: to any point of the Fibra line (the device can be installed behind the hub, detector, keypad, or siren)
-
Fibra line length: up to 2,000 m (when using U/UTP cat.5 twisted pair cable)
-
Encrypted communication: Block encryption with dynamic key for stored and transmitted data
Detection
-
Sensitive elements: 1 × PIR sensor, 1 × K‑band microwave sensor (operating frequency: 24 GHz)
-
Motion detection distance: up to 15 m (when installed at 2.4 m height)
-
Reduced blind zone: up to 0.5 m (detects crawling person at 50 cm from detector)
-
Motion detection angles: horizontal 90°, vertical 71°
-
Motion detection speed: 0.1–4.0 m/s (sensors should face perpendicular to intrusion path)
-
False alarm prevention: Dual motion detection technology, SmartDetect software algorithm
-
Temperature compensation: Effective detection at −10 °C to +40 °C
-
Self‑test: Device checks sensor state and notifies if malfunction detected
-
Installation recommendation: Mount at 2.4 m height; not pet‑immune; indoor use only
Sabotage Protection
-
Tamper alarm: 3 tampers; notifies on attempts to detach, unlock SmartBracket, or remove from mounting panel
-
Protection against spoofing: Device authentication
-
Anti‑masking system: Detects attempts to block detector view
-
Lock for SmartBracket: Secures detector on SmartBracket
-
Communication loss detection: after 36 s (depends on Jeweller/Fibra settings)
Power Supply
-
Operating voltage range: 7−30 V⎓
-
Nominal operating voltage: 24 V⎓
-
Quiescent current at nominal voltage: 4.3 mA
-
Maximum current at nominal voltage: 11.6 mA
-
Power source: Hub via Fibra line
Enclosure
-
Dimensions: 120 × 62 × 52 mm
-
Weight: 156 g
-
Operating temperature range: −10 °C to +40 °C
-
Operating humidity: up to 75%
-
Protection class: IP30
-
Colors: Black, White
Complete Set
Send us your questions about the product.
