AJAX BASELINE PIR Indoor MotionCam PhOD With HDR white

HDR for challenging lighting conditions
MotionCam (PhOD) Jeweller is a wireless motion detector supporting photo verification of alarms, Photo on Demand, and Photo by Scenario features. Intended for indoor installation. It can recognise movement at a distance of up to 12 meters. Ignores pets when installed and set up correctly
MotionCam (PhOD) Jeweller works as part of the Ajax security system, communicating with the hub over two secure radio protocols: the detector uses Jeweller to transmit alarms and events and Wings to transmit photos. The hub communication range is up to 1,700 meters in an open space
A hub is required for the detector to operate
Lightning-fast alarms. Verified
More than a photo. Faster than a video
No intruder goes unnoticed
Stable operation with pre-installed batteries
Unique wireless technologies
System supervision
Sabotage resistance
Effortless installation and setup

Communication

866.0–866.5 MHz
868.0–868.6 MHz
868.7–869.2 MHz
Maximum effective radiated power (ERP) : up to 20 mW
Radio signal modulation : GFSK
Radio signal range : up to 1,700 m
Encrypted communication : All stored and transmitted data are protected by block encryption featuring a dynamic key
Frequency hopping : To prevent radio interference and jamming
Wings communication technology : Two-way communication / Block encryption featuring a dynamic key / Advanced anti-sabotage / Data package reload in case of transmission errors / Photo delivery check

Detection

Motion detection distance : up to 12 m
Motion detection angles : horizontal — 88.5°
Motion detection speed : from 0.3 to 2.0 m/s
Sensitivity : 3 levels
Pet immunity : weight : up to 20 kg / height : up to 50 cm
False alarm prevention : SmartDetect
Temperature compensation : Effective motion detection at temperatures from −10°C to +40°C

Photo verification

Photo by alarm : A built-in camera is activated if the detector is armed and motion is detected
Photo resolution : 640 × 480 px / 320 × 240 px (by default) / 160 × 120 px
HDR image : Improves the accuracy of detail in bright and dark scenes
IR backlight : For night photography and low light conditions
Pictures in a series : from 1 to 5 images with a resolution of 320 × 240 px or 160 × 120 px / from 1 to 3 images with a resolution of 640 × 480 px
Photo delivery time : up to 7 s — 160 × 120 px resolution / up to 9 s — 320 × 240 px resolution / up to 20 s — 640 × 480 px resolution

Recommendations : It is recommended to install the detector at a height of 2.4 m

Anti-sabotage protection

Tamper alarm : Notifications on attempts to detach the device from the surface or remove it from the mounting panel
Protection against spoofing : device authentication
Communication loss detection : within 36 s

Power supply