Anycubic

Anycubic SP Kobra S1/S1 Combo PEI Spring Steel

Order Code: 30794
Anycubic SP Kobra S1/S1 Combo PEI Spring Steel
  • Anycubic SP Kobra S1/S1 Combo PEI Spring Steel
  • Anycubic SP Kobra S1/S1 Combo PEI Spring Steel
    • Anycubic

    Anycubic SP Kobra S1/S1 Combo PEI Spring Steel

    Order Code: 30794
    Stock Level: Out of stock
    Price €17.99
    • The Anycubic SP Kobra S1 / S1 Combo PEI Spring Steel Build Plate: is the removable, flexible magnetic build surface designed for the enclosed CoreXY architecture of the Kobra S1 series.It features a high-grade spring steel core coated on both sides with a textured Polyetherimide (PEI) layer, engineered to provide strong adhesion during printing and effortless part removal once cooled down.
    • Double-Sided Textured PEI Coating: Both sides feature a fine textured powder coating that leaves an attractive matte, textured finish on the bottom layer of 3D prints.
    • Flexible Spring Steel Core: Allows users to remove completed prints instantly simply by bending the sheet—parts snap off cleanly without needing scrapers or spatulas.
    • High Thermal & Magnetic Retention: Rated for continuous temperatures up to 110°C without warping or losing magnetic grip against the heated bed base.
    • Alignment Cutouts & Rear Handle Tabs: Includes precision alignment notches along the rear edge to drop perfectly into place over the bed alignment alignment pins, plus front/rear grab tabs for safe handling without touching hot surfaces.

    Technical Specifications

    • Compatible Models: Anycubic Kobra S1 / Kobra S1 Combo
    • Print Surface Material: Dual-Sided Powder-Coated Textured PEI
    • Substrate Material: High-Flex Hardened Spring Steel Sheet
    • Maximum Operating Temp: Up to 110°C 
    • Supported Filaments: PLA, PETG, ABS, TPU, ASA, PET-CF, PA-CF

    Maintenance & Care Tips

    • Clean Surface with Isopropyl Alcohol (IPA): Regularly wipe down the PEI surface with 90%+ pure Isopropyl Alcohol and a lint-free microfiber cloth to remove skin oils, which are the #1 cause of first-layer adhesion loss.
    • Restore Adhesion with Dish Soap Wash: If filament stops sticking after heavy use, wash the plate under warm water using plain dish soap (like Dawn) and a soft sponge to remove stubborn residues, then dry thoroughly.
    • Avoid Metal Scrapers & Sharp Tools: Never use razor blades or sharp steel spatulas to gouge prints off the surface, as this will tear or scratch the PEI powder coating permanently.

    Measurements

    • Item Weight: 300 g
    • Active Build Area: 250 x 250 mm
    • Total Outer Plate Dimensions: 264 x 276 mm (including extended rear tabs & handle)
    • Plate Thickness: 0.5 mm (spring steel + PEI coating
    Send us your questions about the product.

    Related Products