Anycubic 3D Printer S1 Combo Multicolor With Ace 2 Pro Filament Box with Drying Capability.

Order Code: 31416

Order Code: 31416

Stock Level: Out of stock

Price €629.00

Out-of-the-Box Multicolor: The Anycubic Kobra S1 ACE 2 Pro combo makes multicolor 3d printing effortless. The standard ACE 2 Pro provides 4-color printing out of the box and expands to 16 vibrant colors with 4 ACE 2 Pro for unique models.
Quiet 44dB Mode: Work or sleep without interruption. Powered by 4 independent brushless motors and a next-gen buffer mechanism, the Kobra S1 ACE 2 Pro quiet 3d printer limits operational noise to 44dB, making it an ideal choice for family and homes.
High-Speed CoreXY Enclosure: The 250x250x250mm build volume is surrounded by a fully enclosed CoreXY structure. Driven by Kobra OS, the Kobra S1 ACE 2 Pro maintains extreme accuracy at a rapid 600mm/s print speed, satisfying detailed printing needs.
65℃ Dehumidifier & Storage: Protect prints from humidity defects. The integrated Kobra S1 ACE 2 Pro dry box delivers efficient 65°C active drying while printing. It perfectly preserves filament quality for PLA, PETG, ABS, ASA, and other filaments.
Clog-Free 320°C Smart Tech: Equipped with a clog-resistant 320°C hotend and a wear-resistant ceramic feeding port, the Kobra S1 ACE 2 Pro includes intelligent identification, auto-resume printing, and comprehensive smart sensors to prevent failed prints easily
Note: ACE Pro and ACE 2 Pro cannot be uesd simultaneously. The filaments inside the box in the picture are for display purpose only and not included. Test filament sample is provided in the package.

The Standalone Workflow STEPS (Without a Computer Attached)

Prepare the Model File:Slicing prerequisite. Slice your 3D model using Anycubic Slicer on a PC or laptop, then export the sliced G-code file onto a USB flash drive formatted to FAT32.
Load the USB Drive: Physical connection. Insert the USB flash drive into the front USB port on the Kobra S1 printer body.
Prepare Filaments:Spool setup. Load your chosen filament spools into the ACE 2 Pro unit. Feed the filament ends into the designated ceramic ports until the internal gear motor grabs and holds them.
Select File on Touchscreen: On the 4.3-inch touchscreen, tap Print, select USB Drive, and tap on your sliced G-code file to open the pre-print menu.
Assign Colors & Slots: Map the colors/materials in your file to the corresponding spool slots (1–4) in the ACE 2 Pro directly on the touchscreen display.
Enable Automated Pre-Print Routines: Check the toggles for Auto-Leveling, Flow Calibration, and ACE 2 Pro Active Drying (if handling moisture-sensitive materials like PETG or PA).
Start Print Job: Tap Confirm / Print. The printer will automatically heat the bed and nozzle, run its LeviQ 3.0 auto-leveling and Z-offset checks, perform flow compensation, and execute the print independently.
Monitor & Clear Print Bed: Track progress directly on the touchscreen interface. Once complete, wait for the build plate to cool before flexing the magnetic PEI sheet to remove the finished object.

Features & Specs

Print Technology: FDM (Fused Deposition Modeling) CoreXY
Build Volume: 250 × 250 × 250 mm
Print Speed: Up to 600 mm/s (Recommended: 300 mm/s)
Extruder: Dual-Gear Direct Drive Extruder
Filament Compatibility: PLA, PETG, ABS, ASA, TPU, PA, PC, PET, PVB, and fiber-reinforced filaments
Nozzle Temperature: Up to 320°C
Heated Bed Temperature: Up to 120°C
Leveling: LeviQ 3.0 Auto-Leveling with Auto Z-Offset
Printing Accuracy: ±0.1 mm
Layer Height: 0.05 – 0.36 mm
Nozzle Diameter: 0.4 mm standard (Expandable to 0.25 mm, 0.6 mm, 0.8 mm)
Display: 4.3-inch Capacitive Touchscreen
Connectivity: Wi-Fi, USB

Anycubic ACE 2 Pro Filament Box

Spool Capacity: 4 Spools (expandable up to 16 colors with four ACE 2 Pro units)
Active Drying Temperature: Up to 65 °C (Active PTC heating while printing)
Moisture Control: Active electromagnetic exhaust valve & passive airtight silicone sealing ring
Motors: 4 independent brushless motors (≥5,000-hour rated service life)
Filament Swap Speed: ~56 seconds per color change (50 mm/s feed rate)
Filament Feeding Port: Wear-resistant alumina ceramic inlet with external PTFE tube buffer
Sensors & Detection: Real-time temperature & humidity monitoring, filament RFID identification, runout detection, and tangle detection
Filament Compatibility: 1.75 mm PLA, PETG, ABS, ASA, PET, PA, PC, PVB, TPU (68D), and fiber-reinforced filaments (CF/GF)
Spool Size Compatibility: Flange diameter: 195–200 mm | Spool width: 60–68 mm | Flange thickness: 3–6 mm
Noise Level: Under 48 dB (closed-door printing) / 55 dB (with drying active)
Power Rating: Max 330W (220V) / 235W (110V)
Printer Compatibility: Kobra 3, Kobra 3 V2, Kobra 3 Max, Kobra 3 Max V2, Kobra S1, Kobra S1 Max, Kobra X

Dimensions & Weight (Individual Units)

Kobra S1 3D Printer Body

ACE 2 Pro Filament Box

Combined Setup (Side-by-Side)

Shipping Box / Package for 3D Printer (Shipped in 1 Box)

Shipping Box / Package for ACE 2 Pro Filament Box

Barcode (EAN) 6974662353887

Send us your questions about the product.