Anycubic

Anycubic SP Kobra X Series Quick Release Hotend with 0.4mm Nozzle

Order Code: 30768
Anycubic SP Kobra X Series Quick Release Hotend with 0.4mm Nozzle
  • Anycubic SP Kobra X Series Quick Release Hotend with 0.4mm Nozzle
  • Anycubic SP Kobra X Series Quick Release Hotend with 0.4mm Nozzle
  • Anycubic SP Kobra X Series Quick Release Hotend with 0.4mm Nozzle
  • Anycubic SP Kobra X Series Quick Release Hotend with 0.4mm Nozzle
    • Anycubic

    Anycubic SP Kobra X Series Quick Release Hotend with 0.4mm Nozzle

    Order Code: 30768
    Stock Level: GoodMore stock coming in 8 weeks
    Price €12.99
    • The Anycubic Kobra X Series Quick Release Hotend with 0.4mm Nozzle is an official OEM drop-in thermal module designed specifically for high-speed printing on the Anycubic Kobra X / Kobra X Combo series. Rated for temperatures up to 320C, this module integrates an all-metal heat break, high-efficiency ceramic heater core, pre-wired sensors, and a standard 0.4 mm brass nozzle into a toolless quick-swap housing. 
    • Toolless Quick-Swap Design: Features an integrated quick-release retaining latch that lets you release and swap the hotend assembly in seconds without needing tools, heat-tightening, or disassembling the extruder carriage.
    • High-Temperature Performance (320C): Unlike standard hotends capped at 260C, the all-metal thermal break supports engineering materials like ASA, ABS, and high-temp PETG alongside PLA and TPU. 
    • 360° Ring Ceramic Heating Element: Encloses the melt zone with a high-wattage ceramic ring heater for ultra-fast thermal ramp-up and consistent temperature stability during high-speed volumetric extrusion (up to 600 mm/s print speeds). 
    • Standard 0.4 mm Brass Nozzle: Features an integrated 0.4 mm brass nozzle, providing the ideal balance between fine feature detail and high material output for default slicing profiles. 
    • Pre-Assembled Plug-and-Play Unit: Ships fully assembled with pre-routed wiring connectors, thermistor, heater block, and a high-temperature protective silicone sock.

    Technical Specifications

    • Compatible Models: Anycubic Kobra X / Kobra X Combo / Kobra S1 Series
    • Nozzle Size & Material: 0.4 mm (Brass)
    • Maximum Operating Temperature: 320C
    • Heat Break Type: All-metal thermal isolation
    • Filament Diameter: 1.75 mm
    • Supported Filaments: PLA, PETG, ABS, ASA, TPU, Wood/Silk composites.

    Maintenance & Care Tips

    • Cold Swap Recommended: Always allow the hotend to cool below 40C before pressing the quick-release clip to avoid burns or thermal shock.
    • Silicone Boot Requirement: Keep the custom silicone insulator installed around the heating block. Running without the boot allows part-cooling airflow to destabilize temperature readings, causing thermal runaway stops.
    • Run PID Tuning: After clipping in a new module, run an Auto PID Calibration from the printer menu to calibrate temperature response for optimal thermal accuracy.
    Barcode (EAN) 30768
    Send us your questions about the product.

    Related Products